Plasterboard foot lifter — 3D-printable model preview

AR view

Tools & jigs Simple

Plasterboard foot lifter

Lift wall sheets into place with your foot

Slide the thin toe under a sheet of plasterboard or panelling and step on the back of the lever: the round fulcrum lifts the sheet about 20 mm and holds it tight against the one above while both hands are free to drive the screws.

Customize this model

Size: 216 × 55 × 40 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 84.6 cm³
Est. weight (PLA): 105 g
Parts to print: 1
Category: Tools & jigs
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 216 × 55 × 40 mm, with 5.0 mm walls
Custom outline traced from a shape

How to print it

Print in PETG, profile on the bed.

Prints as shown on its outline, no supports.

Filament: at most about 105 g of PLA printed solid (roughly $2.10 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the plasterboard foot lifter model?

The plasterboard foot lifter model measures 216 × 55 × 40 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in PETG, profile on the bed. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 105 g of PLA (84.6 cm³ printed solid), roughly $2.10 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More tools & jigs

Pegboard J hook

Hang tools on pegboard

Simple

Bench vise soft jaw caps

Protect work held in a vise

Simple (set)

Knife sharpening angle wedge

Hold a constant angle on a whetstone

Simple

Leveling shim with slot

Level furniture and appliances

Simple (set)

Square-head bench dogs

Fence and square work on a dog-hole bench

Advanced (set)

608 bearing press-in driver

Press bearings in without damaging them

Advanced

Threaded rod cutting guide

Cut threaded rod square without damaging threads

Medium

Hand tap square-start guide

Start hand taps square to the work

Advanced

See all 61 in Tools & jigs

Make it fit your space

Change the size, walls, dividers, holes and labels of the plasterboard foot lifter model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model