Protect work held in a vise
Slip a pair over the jaws of a bench vise up to 100 mm wide so you can clamp finished wood, plastic or threads without marking them. Print it as shown, then turn it over so the floor becomes the top.
Print two in TPU or PETG.
Print floor-down as shown, then turn it over to use it.
Filament: at most about 14.3 g of PLA printed solid (roughly $0.29 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The bench vise soft jaw caps model measures 104 × 18 × 30 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
Usually not. Print two in TPU or PETG. Print floor-down as shown, then turn it over to use it.
At most about 14.3 g of PLA (11.5 cm³ printed solid), roughly $0.29 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the bench vise soft jaw caps model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.