608 bearing press-in driver — 3D-printable model preview

AR view

Tools & jigs Advanced

608 bearing press-in driver

Press bearings in without damaging them

Presses a 608 skateboard bearing into a hub or housing by its outer race only: the narrow 1.5 mm rim bears on the race while the 19 mm opening clears the shield and inner race. Tap the solid end with a mallet and the bearing goes in square without brinelling its balls.

Customize this model

Size (Base A): Ø 30 mm, 60 mm tall
Shape: Round
Walls: 3.0 mm
Volume: 19.6 cm³
Est. weight (PLA): 24.3 g
Parts to print: 1
Category: Tools & jigs
Made by: Krypto
Built in: 16 steps

What’s in it

Round, Ø 30 mm, 60 mm tall, with 3.0 mm walls
2 more bases built on (Bases B–C)
Base B: round, Ø 30 mm (stacked)
Base C: round, Ø 22 mm, 8 mm tall (stacked)

How to print it

Print in PETG with 100% infill.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 24.3 g of PLA printed solid (roughly $0.49 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the 608 bearing press-in driver model?

The 608 bearing press-in driver model measures Ø 30 mm, 60 mm tall. That is Base A; 2 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in PETG with 100% infill. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 24.3 g of PLA (19.6 cm³ printed solid), roughly $0.49 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More tools & jigs

Pegboard J hook

Hang tools on pegboard

Simple

Bench vise soft jaw caps

Protect work held in a vise

Simple (set)

Knife sharpening angle wedge

Hold a constant angle on a whetstone

Simple

Leveling shim with slot

Level furniture and appliances

Simple (set)

Plasterboard foot lifter

Lift wall sheets into place with your foot

Simple

Square-head bench dogs

Fence and square work on a dog-hole bench

Advanced (set)

Threaded rod cutting guide

Cut threaded rod square without damaging threads

Medium

Hand tap square-start guide

Start hand taps square to the work

Advanced

See all 61 in Tools & jigs

Make it fit your space

Change the size, walls, dividers, holes and labels of the 608 bearing press-in driver model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model