Pipe clamp glue-up risers — 3D-printable model preview

AR view

Woodworking Simple (set)

Pipe clamp glue-up risers

Hold pipe clamps steady during a glue-up

Four risers hold 3/4 inch pipe clamps upright and off the bench in a cradle, the same height every time: the clamps stop rolling over, the panel sits level on the bars, and there is room below for squeeze-out and for slipping in the next clamp.

Customize this model

Size: 50 × 45 × 30 mm
Shape: Custom outline
Walls: 4.0 mm
Volume: 27.8 cm³
Est. weight (PLA): 34.4 g
Parts to print: 1
Category: Woodworking
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 50 × 45 × 30 mm, with 4.0 mm walls
Custom outline traced from a shape

How to print it

Print four.

Prints as shown on its outline, no supports.

Filament: at most about 34.4 g of PLA printed solid (roughly $0.69 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the pipe clamp glue-up risers model?

The pipe clamp glue-up risers model measures 50 × 45 × 30 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print four. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 34.4 g of PLA (27.8 cm³ printed solid), roughly $0.69 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More woodworking

Router table featherboard

Keep wood pressed against a fence

Medium

Wooden dovetail marker

Mark dovetail joints

Simple

Board centre finder

Mark the centre line of a board edge

Advanced

Jointer and router push block

Feed boards safely past a cutter

Advanced

Eccentric cam bench clamp

Clamp work to the bench in a quarter turn

Simple

Winding sticks for checking twist

Detect twist in a board before planing

Simple (set)

Kerf-keeper wedge

Stop a saw kerf closing on the blade

Simple (set)

Cambered glue-up cauls

Clamp panel glue-ups evenly across their width

Simple (set)

See all 31 in Woodworking

Make it fit your space

Change the size, walls, dividers, holes and labels of the pipe clamp glue-up risers model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model