Pin Pilot

Start small nails without hitting fingers

Press a panel pin or small nail into the slot that grips it and tap it in while holding the long handle: your fingers stay 100 mm from the hammer, and the three slots take shanks from 1.4 to 3 mm. Pull the holder away sideways once the nail stands on its own.

Customize this model

Size: 123 × 22 × 9 mm
Shape: Custom outline
Walls: 4.0 mm
Volume: 9.7 cm³
Est. weight (PLA): 12.0 g
Parts to print: 1
Category: Tools & jigs
Made by: Krypto
Built in: 5 steps

What’s in it

Custom outline, 123 × 22 × 9 mm, with 4.0 mm walls
Custom outline traced from a shape

How to print it

PETG, printed flat.

Prints flat as a plate, no supports.

Filament: at most about 12.0 g of PLA printed solid (roughly $0.24 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the pin Pilot model?

The pin Pilot model measures 123 × 22 × 9 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG, printed flat. Prints flat as a plate, no supports.

How much filament does it use?

At most about 12.0 g of PLA (9.7 cm³ printed solid), roughly $0.24 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.