Use pencils down to the last few centimetres
Lengthens a pencil worn down to a stub so you can use it to the end: push the stub into the tube until it grips.
Prints as shown on its floor, no supports.
Filament: at most about 4.7 g of PLA printed solid (roughly $0.09 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The pencil stub extender model measures Ø 12 mm, 70 mm tall. You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports.
At most about 4.7 g of PLA (3.8 cm³ printed solid), roughly $0.09 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the pencil stub extender model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.