Nissen Bin

Keep a small loaf under a vaulted roof

A bread bin built as a barrel vault hut. Print it standing up, then lay it on its flat side: the half-round vault arches over the loaf, the knob lid becomes the end door, and the curved roof sheds crumbs and takes up less counter than a box of the same volume.

Customize this model

Size: 220 × 110 × 280 mm
Shape: Half-round
Walls: 2.4 mm
Volume: 489 cm³
Est. weight (PLA): 607 g
Parts to print: 2
Category: Food storage
Made by: Krypto
Built in: 8 steps

What’s in it

Half-round, 220 × 110 × 280 mm, with 2.4 mm walls
Telescoping lid (prints separately)

How to print it

Print upright as shown, then lay it on the flat face.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 607 g of PLA printed solid (roughly $12.14 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the nissen Bin model?

The nissen Bin model measures 220 × 110 × 280 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print upright as shown, then lay it on the flat face. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 607 g of PLA (489 cm³ printed solid), roughly $12.14 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.