Drip-dry a milk frother over a cup
Stand a handheld milk frother whisk-down through the top plate and it drips into the cup below instead of onto the counter.
Prints as shown on its floor, no supports. Stacked parts are fused into one print.
Filament: at most about 48.6 g of PLA printed solid (roughly $0.97 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The milk frother wand stand model measures Ø 60 mm, 72 mm tall. That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports. Stacked parts are fused into one print.
At most about 48.6 g of PLA (39.2 cm³ printed solid), roughly $0.97 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the milk frother wand stand model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.