Brew tea with a drainage tray
A tea tray for brewing at the table: pour freely and the water runs through the slatted top into the hidden reservoir below.
Prints as shown on its floor, no supports. Stacked parts are fused into one print.
Filament: at most about 242 g of PLA printed solid (roughly $4.83 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The gongfu tea tray model measures 240 × 150 × 32 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports. Stacked parts are fused into one print.
At most about 242 g of PLA (195 cm³ printed solid), roughly $4.83 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the gongfu tea tray model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.