Kigumi Pair

Join two pen cups with a sliding dovetail

Two identical pen cups that slide together on a dovetail into one 80 mm square block, the way Japanese joinery locks timbers. Turn one cup round, lower it onto the other and the tail drops into the socket; lift one off to share it across the desk.

Customize this model

Size: 50 × 80 × 95 mm
Shape: Custom outline
Walls: 2.4 mm
Volume: 69.5 cm³
Est. weight (PLA): 86.2 g
Parts to print: 1
Category: Desk organisation
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 50 × 80 × 95 mm, with 2.4 mm walls
Custom outline traced from a shape

How to print it

Print two; same orientation, they mate when one is turned.

Prints as shown on its outline, no supports.

Filament: at most about 86.2 g of PLA printed solid (roughly $1.72 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the kigumi Pair model?

The kigumi Pair model measures 50 × 80 × 95 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print two; same orientation, they mate when one is turned. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 86.2 g of PLA (69.5 cm³ printed solid), roughly $1.72 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.