Hanging cedar moth-repellent capsule — 3D-printable model preview

AR view

Wardrobe & dressing Multi-part assembly

Hanging cedar moth-repellent capsule

Keep moths away from clothes with cedar or lavender

A capsule that hangs on the wardrobe rail by its ring. Fill it with cedar chips or dried lavender and screw the lid on; the open voronoi walls let the scent out to keep clothes moths away. Unscrew to refresh.

Customize this model

Size: Ø 55 mm, 85 mm tall
Shape: Round
Walls: 1.8 mm
Volume: 25.6 cm³
Est. weight (PLA): 31.8 g
Parts to print: 3
Category: Wardrobe & dressing
Made by: Krypto
Built in: 8 steps

What’s in it

Round, Ø 55 mm, 85 mm tall, with 1.8 mm walls
1 patterned wall panel (cut-out)
Screw-on lid (prints separately)

How to print it

Hang one per metre of rail. Sand the cedar chips lightly to refresh them.

Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

Filament: at most about 31.8 g of PLA printed solid (roughly $0.64 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the hanging cedar moth-repellent capsule model?

The hanging cedar moth-repellent capsule model measures Ø 55 mm, 85 mm tall. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Hang one per metre of rail. Sand the cedar chips lightly to refresh them. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

How much filament does it use?

At most about 31.8 g of PLA (25.6 cm³ printed solid), roughly $0.64 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF gives a 3MF per part plus a Bambu Studio / Orca Slicer project with each part on its own plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More wardrobe & dressing

Shirt collar extender with toggle

Loosen a tight shirt collar under a tie

Simple

Empty hanger collecting post

Collect empty hangers in one tidy stack

Advanced

Over-the-door hook

Add a hook to any door without screws

Simple

Hanger cascade hook

Hang clothes vertically to save rail space

Simple

Hairpin-leg bedside valet tray

Empty your pockets onto a bedside valet

Medium

Capsule glasses and watch tray on a fin stand

Perch glasses and a watch by the bed

Medium

Hijab pin and magnet dish

Keep hijab pins, safety pins, magnets and brooches apart

Medium

Sneaker cleaning station

Clean trainers over a drip grid with the kit beside it

Medium

See all 38 in Wardrobe & dressing

Make it fit your space

Change the size, walls, dividers, holes and labels of the hanging cedar moth-repellent capsule model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model