Close open handlebar ends
Push-in end caps for 22 mm bicycle handlebars, replacing lost originals: an open bar end can cut like a punch in a fall.
Print two in PETG or TPU.
Prints as shown on its floor, no supports. Stacked parts are fused into one print.
Filament: at most about 5.0 g of PLA printed solid (roughly $0.10 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The handlebar end plugs model measures Ø 24 mm, 7 mm tall. That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.
No. Print two in PETG or TPU. Prints as shown on its floor, no supports. Stacked parts are fused into one print.
At most about 5.0 g of PLA (4.0 cm³ printed solid), roughly $0.10 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the handlebar end plugs model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.