Cobogó

Stack perforated blocks into a shelf screen

A breeze block for the desk, after the perforated cobogó blocks of Brazilian modernism. Lay it on its back and it is an open cubby with a pierced back; stack several in a grid and they become a low shelf wall that stores books and objects while light and air pass through like a garden screen.

Customize this model

Size: 90 × 90 × 40 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 20.1 cm³
Est. weight (PLA): 24.9 g
Parts to print: 1
Category: Home hardware & architecture
Made by: Krypto
Built in: 12 steps

What’s in it

Rectangular, 90 × 90 × 40 mm, with 3.0 mm walls
1 patterned wall panel (cut-out)

How to print it

Print face down; print six or nine for a screen.

Prints as shown on its floor, no supports.

Filament: at most about 24.9 g of PLA printed solid (roughly $0.50 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the cobogó model?

The cobogó model measures 90 × 90 × 40 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print face down; print six or nine for a screen. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 24.9 g of PLA (20.1 cm³ printed solid), roughly $0.50 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.