Clasp Rail

Hang frames and panels level on interlocking rails

An interlocking hanging rail for frames, mirrors and panels. Screw one rail to the wall with its lip up and one to the back of the frame with its lip down: the lips hook behind each other, the frame drops into place level and flush, and it lifts off again in one move.

Customize this model

Size: 200 × 26 × 16 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 4.4 cm³
Est. weight (PLA): 5.4 g
Parts to print: 1
Category: Home hardware & architecture
Made by: Krypto
Built in: 27 steps

What’s in it

Rectangular, 200 × 26 × 16 mm, with 3.0 mm walls
3 holes in the floor

How to print it

Print two. PETG. Screw both before hanging.

Prints as shown on its floor, no supports.

Filament: at most about 5.4 g of PLA printed solid (roughly $0.11 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the clasp Rail model?

The clasp Rail model measures 200 × 26 × 16 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print two. PETG. Screw both before hanging. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 5.4 g of PLA (4.4 cm³ printed solid), roughly $0.11 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.