Hide cables and power strips
A lidded cable box with vent slots on the front, cable holes on both ends and rounded corners.
Prints as shown on its floor, no supports. The lid prints as a separate part, top down.
Filament: at most about 242 g of PLA printed solid (roughly $4.84 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The cable management box pro model measures 300 × 140 × 130 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.
At most about 242 g of PLA (195 cm³ printed solid), roughly $4.84 of filament at $20 per kg. Normal infill uses less.
2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the cable management box pro model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.