Align cables in neat parallel lines
Thread up to eight cables through the comb and slide it along the bundle, so a desk-to-floor run lies in neat parallel lines.
Prints flat as a plate, no supports.
Filament: at most about 22.3 g of PLA printed solid (roughly $0.45 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The cable comb model measures 120 × 40 × 9 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints flat as a plate, no supports.
At most about 22.3 g of PLA (18.0 cm³ printed solid), roughly $0.45 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the cable comb model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.