Windowsill mini greenhouse with glass-pane ledge — 3D-printable model preview

AR view

Garden & plants Medium

Windowsill mini greenhouse with glass-pane ledge

Root cuttings and sprout seeds under glass

A seed and cutting tray with a ledge moulded inside the walls just below the rim. Lay a piece of glass or clear acrylic on the ledge and it becomes a little greenhouse that holds the damp air in. Drain holes in the floor and a label slot on the front.

Customize this model

Size: 200 × 120 × 80 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 153 cm³
Est. weight (PLA): 190 g
Parts to print: 1
Category: Garden & plants
Made by: Krypto
Built in: 4 steps

What’s in it

Rectangular, 200 × 120 × 80 mm, with 2.0 mm walls
4 holes in the floor

How to print it

Cut the glass or acrylic about 195 x 115 mm. Stand it on a saucer.

Prints as shown on its floor, no supports.

Filament: at most about 190 g of PLA printed solid (roughly $3.80 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the windowsill mini greenhouse with glass-pane ledge model?

The windowsill mini greenhouse with glass-pane ledge model measures 200 × 120 × 80 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Cut the glass or acrylic about 195 x 115 mm. Stand it on a saucer. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 190 g of PLA (153 cm³ printed solid), roughly $3.80 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More garden & plants

Plant stem support clip

Fix plant stems to canes

Simple

Garden cane connector

Build garden frames from canes

Medium (set)

Plant pot feet

Raise plant pots for drainage

Medium (set)

Seed tray dibber board

Make evenly spaced holes for sowing

Advanced

Solar garden light stake

Repair solar garden lights

Medium

Garden-rock spare-key hider

Hide a spare key in the garden in plain sight

Multi-part assembly

Oyster-mushroom fruiting bucket

Grow oyster mushrooms out of the side holes

Multi-part assembly

Holiday plant-sitter wick reservoir

Water four plants for up to two weeks while you are away

Multi-part assembly

See all 104 in Garden & plants

Make it fit your space

Change the size, walls, dividers, holes and labels of the windowsill mini greenhouse with glass-pane ledge model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model