Garden-rock spare-key hider — 3D-printable model preview

AR view

Garden & plants Multi-part assembly

Garden-rock spare-key hider

Hide a spare key in the garden in plain sight

A spare-key box that looks like a stone. A faceted rock texture wraps all round and the twist-lock lid sits on the underside, so once it is set down in a flower bed nobody sees an opening. A quarter turn locks it.

Customize this model

Size: 95 × 75 × 45 mm
Shape: Egg-shaped
Walls: 2.4 mm
Volume: 108 cm³
Est. weight (PLA): 134 g
Parts to print: 3
Category: Garden & plants
Made by: Krypto
Built in: 9 steps

What’s in it

Egg-shaped, 95 × 75 × 45 mm, with 2.4 mm walls
1 patterned wall panel (raised)
Twist-lock lid (prints separately)

How to print it

Print in grey or stone-effect filament. Place it lid-down.

Prints as shown on its floor, no supports. The twist-lock lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

Filament: at most about 134 g of PLA printed solid (roughly $2.68 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the garden-rock spare-key hider model?

The garden-rock spare-key hider model measures 95 × 75 × 45 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print in grey or stone-effect filament. Place it lid-down. Prints as shown on its floor, no supports. The twist-lock lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

How much filament does it use?

At most about 134 g of PLA (108 cm³ printed solid), roughly $2.68 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF gives a 3MF per part plus a Bambu Studio / Orca Slicer project with each part on its own plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More garden & plants

Plant stem support clip

Fix plant stems to canes

Simple

Garden cane connector

Build garden frames from canes

Medium (set)

Plant pot feet

Raise plant pots for drainage

Medium (set)

Seed tray dibber board

Make evenly spaced holes for sowing

Advanced

Solar garden light stake

Repair solar garden lights

Medium

Windowsill mini greenhouse with glass-pane ledge

Root cuttings and sprout seeds under glass

Medium

Oyster-mushroom fruiting bucket

Grow oyster mushrooms out of the side holes

Multi-part assembly

Holiday plant-sitter wick reservoir

Water four plants for up to two weeks while you are away

Multi-part assembly

See all 104 in Garden & plants

Make it fit your space

Change the size, walls, dividers, holes and labels of the garden-rock spare-key hider model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model