Holiday plant-sitter wick reservoir — 3D-printable model preview

AR view

Garden & plants Multi-part assembly

Holiday plant-sitter wick reservoir

Water four plants for up to two weeks while you are away

A water tank that keeps up to four pot plants watered while you are away. Thread cotton cords through the four holes in the lid, push the other ends into the soil, and the plants draw up water as they need it.

Customize this model

Size: Ø 120 mm, 140 mm tall
Shape: Round
Walls: 2.0 mm
Volume: 234 cm³
Est. weight (PLA): 290 g
Parts to print: 3
Category: Garden & plants
Made by: Krypto
Built in: 22 steps

What’s in it

Round, Ø 120 mm, 140 mm tall, with 2.0 mm walls
4 holes in the lid
Raised text: “Label”
1 patterned wall panel (raised)
Screw-on lid (prints separately)

How to print it

Use cotton or nylon cord. Stand the tank level with the pots or higher.

Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

Filament: at most about 290 g of PLA printed solid (roughly $5.80 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the holiday plant-sitter wick reservoir model?

The holiday plant-sitter wick reservoir model measures Ø 120 mm, 140 mm tall. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Use cotton or nylon cord. Stand the tank level with the pots or higher. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

How much filament does it use?

At most about 290 g of PLA (234 cm³ printed solid), roughly $5.80 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF gives a 3MF per part plus a Bambu Studio / Orca Slicer project with each part on its own plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More garden & plants

Plant stem support clip

Fix plant stems to canes

Simple

Garden cane connector

Build garden frames from canes

Medium (set)

Plant pot feet

Raise plant pots for drainage

Medium (set)

Seed tray dibber board

Make evenly spaced holes for sowing

Advanced

Solar garden light stake

Repair solar garden lights

Medium

Oyster-mushroom fruiting bucket

Grow oyster mushrooms out of the side holes

Multi-part assembly

Windowsill mini greenhouse with glass-pane ledge

Root cuttings and sprout seeds under glass

Medium

Garden-rock spare-key hider

Hide a spare key in the garden in plain sight

Multi-part assembly

See all 104 in Garden & plants

Make it fit your space

Change the size, walls, dividers, holes and labels of the holiday plant-sitter wick reservoir model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model