Wardrobe damp trap — 3D-printable model preview

AR view

Sustainable living Advanced

Wardrobe damp trap

Pull damp out of a wardrobe and stop musty smells

A two-part moisture trap for damp cupboards and wardrobes. Fill the top tray with calcium-chloride crystals: they pull water out of the air, turn to liquid and drip through the holes into the lower chamber, which you empty now and then.

Customize this model

Size (Base A): Ø 95 mm, 60 mm tall
Shape: Round
Walls: 2.0 mm
Volume: 86.0 cm³
Est. weight (PLA): 107 g
Parts to print: 1
Category: Sustainable living
Made by: Krypto
Built in: 3 steps

What’s in it

Round, Ø 95 mm, 60 mm tall, with 2.0 mm walls
5 holes in the floor
1 patterned wall panel (cut-out)
One more base built on (Base B)
Base B: round, Ø 90 mm, 45 mm tall (stacked)

How to print it

Use calcium chloride refill crystals. Keep away from children and pets.

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 107 g of PLA printed solid (roughly $2.13 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the wardrobe damp trap model?

The wardrobe damp trap model measures Ø 95 mm, 60 mm tall. That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Use calcium chloride refill crystals. Keep away from children and pets. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 107 g of PLA (86.0 cm³ printed solid), roughly $2.13 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More sustainable living

Bokashi bucket press plate

Press air out of a bokashi compost bucket

Simple

Bottle-to-bottle drain coupler

Drain the last drops into a new bottle

Medium

Tealight cup refill tray

Refill used tealight cups with leftover wax

Advanced

Charger cable strain-relief splint

Stop charger cables fraying at the plug

Simple (set)

Desk-size box-fan air purifier shell

Clean the air round your desk with a fan and filter sheets

Multi-part assembly

Mycelium brick mould

Grow a solid brick of mushroom mycelium as a biodegradable building material

Multi-part assembly

Spider-taxi rescue box

Catch a spider against the wall and slide a card in to carry it outside

Simple

Scrap-regrow windowsill station

Regrow lettuce, celery, spring onions and carrot tops from kitchen scraps

Advanced

See all 31 in Sustainable living

Make it fit your space

Change the size, walls, dividers, holes and labels of the wardrobe damp trap model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model