Twin Keep

Shake salt or pepper from interlocking towers

A salt or pepper keep shaped as an L-plan tower. Print two, one light and one dark: turned to face each other, the two Ls lock together into one solid 60 by 90 mm block, two towers that become a single building on the table. The shaker holes are in the roof and the snug cap underneath lifts off for filling.

Customize this model

Size: 60 × 60 × 84 mm
Shape: Custom outline
Walls: 2.0 mm
Volume: 54.0 cm³
Est. weight (PLA): 66.9 g
Parts to print: 2
Category: Serving & table
Made by: Krypto
Built in: 22 steps

What’s in it

Custom outline, 60 × 60 × 84 mm, with 2.0 mm walls
Custom outline traced from a shape
3 holes in the floor
Telescoping lid (prints separately)

How to print it

Two colours, food-safe PETG. Print it as shown, then turn it over so the floor becomes the top. The cap becomes the base.

Print floor-down as shown, then turn it over to use it. The lid prints as a separate part, top down.

Filament: at most about 66.9 g of PLA printed solid (roughly $1.34 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the twin Keep model?

The twin Keep model measures 60 × 60 × 84 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Two colours, food-safe PETG. Print it as shown, then turn it over so the floor becomes the top. The cap becomes the base. Print floor-down as shown, then turn it over to use it. The lid prints as a separate part, top down.

How much filament does it use?

At most about 66.9 g of PLA (54.0 cm³ printed solid), roughly $1.34 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.