Loggia

Hold napkins upright behind an open arcade

A napkin holder with an arcade on both faces. Napkins stand upright between the two arcaded walls; the tall arches show their pattern from across the table and let you pinch one out from the side, while the solid piers keep the stack upright even when it is nearly empty.

Customize this model

Size: 150 × 44 × 98 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 22.8 cm³
Est. weight (PLA): 28.3 g
Parts to print: 1
Category: Serving & table
Made by: Krypto
Built in: 56 steps

What’s in it

Rectangular, 150 × 44 × 98 mm, with 2.4 mm walls
Raised grip base
6 holes in the walls

How to print it

Print upright; arches bridge cleanly.

Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

Filament: at most about 28.3 g of PLA printed solid (roughly $0.57 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the loggia model?

The loggia model measures 150 × 44 × 98 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

It may need supports in places. Print upright; arches bridge cleanly. Prints as shown on its floor, no supports. Large holes in the walls may need supports or good bridging.

How much filament does it use?

At most about 28.3 g of PLA (22.8 cm³ printed solid), roughly $0.57 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.