Table Perch

Hang a bag under a cafe table

Rest the pad on a café or restaurant table so the hook hangs over the edge: the J curls back under the table top, so a handbag or laptop bag hangs off the floor, out of the aisle and against your knees where nobody can lift it. Flat enough for a coat pocket.

Customize this model

Size: 77 × 85 × 30 mm
Shape: Custom outline
Walls: 4.0 mm
Volume: 40.3 cm³
Est. weight (PLA): 49.9 g
Parts to print: 1
Category: Travel & everyday carry
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 77 × 85 × 30 mm, with 4.0 mm walls
Custom outline traced from a shape

How to print it

Print it lying on its side (the profile flat on the bed) in PETG. Stick a felt pad under the top.

Filament: at most about 49.9 g of PLA printed solid (roughly $1.00 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the table Perch model?

The table Perch model measures 77 × 85 × 30 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print it lying on its side (the profile flat on the bed) in PETG. Stick a felt pad under the top.

How much filament does it use?

At most about 49.9 g of PLA (40.3 cm³ printed solid), roughly $1.00 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.