Haul Hook

Carry several shopping bags comfortably

Slip the handles of three or four shopping bags into the hook and carry them all by the 90 mm grip bar: the weight spreads across your whole palm instead of cutting into your fingers, and the J keeps the handles together so the bags stop swinging apart. Lives in the car door pocket.

Customize this model

Size: 30 × 52 × 90 mm
Shape: Custom outline
Walls: 5.0 mm
Volume: 70.4 cm³
Est. weight (PLA): 87.3 g
Parts to print: 1
Category: Travel & everyday carry
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 30 × 52 × 90 mm, with 5.0 mm walls
Custom outline traced from a shape

How to print it

Print it lying on its side (the profile flat on the bed) in PETG.

Filament: at most about 87.3 g of PLA printed solid (roughly $1.75 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the haul Hook model?

The haul Hook model measures 30 × 52 × 90 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print it lying on its side (the profile flat on the bed) in PETG.

How much filament does it use?

At most about 87.3 g of PLA (70.4 cm³ printed solid), roughly $1.75 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.