Mend Card

Carry a needle and thread in the wallet

A credit-card sized mending kit for the wallet: wind black, white and navy thread between the edge notches, weave two needles through the tiny holes and tuck the end of each thread into the side slit. A lost button or split seam on a trip gets fixed in five minutes.

Customize this model

Size: 86 × 54 × 7 mm
Shape: Custom outline
Walls: 2.0 mm
Volume: 9.0 cm³
Est. weight (PLA): 11.1 g
Parts to print: 1
Category: Travel & everyday carry
Made by: Krypto
Built in: 26 steps

What’s in it

Custom outline, 86 × 54 × 7 mm, with 2.0 mm walls
Custom outline traced from a shape
4 holes in the floor
Engraved text: “MEND”

How to print it

PETG, printed flat.

Prints flat as a plate, no supports.

Filament: at most about 11.1 g of PLA printed solid (roughly $0.22 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the mend Card model?

The mend Card model measures 86 × 54 × 7 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG, printed flat. Prints flat as a plate, no supports.

How much filament does it use?

At most about 11.1 g of PLA (9.0 cm³ printed solid), roughly $0.22 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.