Keep a bar of surf wax out of the sand and the sun
A screw-top case for a puck of surf wax, sized for the round bars. It keeps sand and lint off the wax and stops it melting into the car seat. SURF wraps round the side and WAX is on the lid.
White PETG stays cooler in the car than black.
Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.
Filament: at most about 85.0 g of PLA printed solid (roughly $1.70 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The surf wax case model measures Ø 96 mm, 36 mm tall. You can change every size in the free SO3D.xyz generator before you download it.
No. White PETG stays cooler in the car than black. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.
At most about 85.0 g of PLA (68.5 cm³ printed solid), roughly $1.70 of filament at $20 per kg. Normal infill uses less.
3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the surf wax case model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.