Keyhole pebble tarp tie-out — 3D-printable model preview

AR view

Outdoor & adventure Simple (set)

Keyhole pebble tarp tie-out

Add a tie-out point anywhere on a tarp

Push a pebble under the tarp edge where you need a tie-out, feed the fabric bump through the round hole and slide it into the slot: the pebble is trapped, and the line on the end hole can take full tension. A new anchor anywhere, no grommet needed.

Customize this model

Size: 70 × 34 × 10 mm
Shape: Rectangular
Walls: 5.0 mm
Volume: 8.4 cm³
Est. weight (PLA): 10.4 g
Parts to print: 1
Category: Outdoor & adventure
Made by: Krypto
Built in: 35 steps

What’s in it

Rectangular, 70 × 34 × 10 mm, with 5.0 mm walls
3 holes in the floor

How to print it

Print six; PETG.

Prints flat as a plate, no supports.

Filament: at most about 10.4 g of PLA printed solid (roughly $0.21 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the keyhole pebble tarp tie-out model?

The keyhole pebble tarp tie-out model measures 70 × 34 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print six; PETG. Prints flat as a plate, no supports.

How much filament does it use?

At most about 10.4 g of PLA (8.4 cm³ printed solid), roughly $0.21 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More outdoor & adventure

Bow-drill palm block with ball-race socket

Cut friction at the top of a bow drill

Advanced

Tick removal card

Remove ticks from people and pets

Simple

Bat roost box

Give bats a place to roost

Medium

Trekking pole tip cover

Cover a trekking pole tip

Simple (set)

Cathole trowel with depth notches

Dig a cathole to the correct depth

Simple

Gas canister stabiliser tripod

Stop a canister stove tipping over

Simple

Crab and lobster size gauge

Check crabs and lobsters against minimum size

Simple

Avalanche slope clinometer card

Measure slope angle for avalanche safety

Simple

See all 43 in Outdoor & adventure

Make it fit your space

Change the size, walls, dividers, holes and labels of the keyhole pebble tarp tie-out model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model