Stylus and nib garage — 3D-printable model preview

AR view

Desk organisation Multi-part assembly

Stylus and nib garage

Keep tablet styluses and spare nibs together

A lidded case for digital artists: three padded-length slots for the stylus, a backup and a pencil, and a small side box for the replacement nibs that otherwise vanish from their tiny pots.

Customize this model

Size (Base A): 190 × 52 × 24 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 94.5 cm³
Est. weight (PLA): 117 g
Parts to print: 2
Category: Desk organisation
Made by: Krypto
Built in: 31 steps

What’s in it

Rectangular, 190 × 52 × 24 mm, with 2.4 mm walls
2 dividers
Lift-off lid (prints separately)
One more base built on (Base B)
Base B: rectangular, 40 × 52 mm, 24 mm tall (beside)

How to print it

Slots fit styluses up to 12 mm thick; the side box takes spare nibs and the nib remover.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 117 g of PLA printed solid (roughly $2.34 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the stylus and nib garage model?

The stylus and nib garage model measures 190 × 52 × 24 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Slots fit styluses up to 12 mm thick; the side box takes spare nibs and the nib remover. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 117 g of PLA (94.5 cm³ printed solid), roughly $2.34 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More desk organisation

Desk-back gap shelf

Stop things falling down behind the desk

Simple (set)

Desk mug lid with spoon slot

Keep a desk drink warm and covered

Simple

Rolled-drawing corner weights

Hold rolled drawings flat on the desk

Multi-part assembly

Desk-edge hook for bag or headset

Hang a bag or headset at a desk

Simple

Desk-edge cup holder

Keep drinks off a busy desk

Simple

Signal Quad

Show whether you can be interrupted

Simple

Lean-To

Stand a tablet behind a row of books

Medium

Dayface

Plan the day hour by hour with tokens

Medium

See all 155 in Desk organisation

Make it fit your space

Change the size, walls, dividers, holes and labels of the stylus and nib garage model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model