SMD cut-tape strip feeder — 3D-printable model preview

AR view

Electronics & robotics Advanced

SMD cut-tape strip feeder

Feed SMD parts from cut tape during assembly

Lay short strips of 8 mm component tape in the nine lanes and peel the cover back: resistors and capacitors stay in their pockets, in order and labelled, while tweezers reach over the low front wall. Hand assembly of a board goes lane by lane without spilling a single 0805.

Customize this model

Size: 90 × 120 × 10 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 34.6 cm³
Est. weight (PLA): 42.9 g
Parts to print: 1
Category: Electronics & robotics
Made by: Krypto
Built in: 32 steps

What’s in it

Rectangular, 90 × 120 × 10 mm, with 2.0 mm walls
Raised grip base
8 dividers

How to print it

Prints as shown on its floor, no supports.

Filament: at most about 42.9 g of PLA printed solid (roughly $0.86 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the SMD cut-tape strip feeder model?

The SMD cut-tape strip feeder model measures 90 × 120 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 42.9 g of PLA (34.6 cm³ printed solid), roughly $0.86 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More electronics & robotics

Stripboard track cutter handle

Cut copper tracks on stripboard

Advanced

18650 pack-building spacer, 4 x 2

Space 18650 cells for building a battery pack

Medium (set)

608 bearing pillow block

Mount a 608 bearing in a mechanism

Medium

NEMA 17 motor mount plate

Mount a stepper motor

Medium

2020 extrusion end cap

Cap aluminium extrusion ends

Simple (set)

Servo angle protractor

Measure and set servo angles

Medium

DIP chip leg straightener

Straighten DIP chip legs to row spacing

Medium

Optical encoder slot wheel

Count wheel turns on a small robot

Simple

See all 36 in Electronics & robotics

Make it fit your space

Change the size, walls, dividers, holes and labels of the SMD cut-tape strip feeder model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model