Ski wax and scraper kit — 3D-printable model preview

AR view

Outdoor & adventure Multi-part assembly

Ski wax and scraper kit

Keep ski or snowboard wax, scraper and brush together

A tuning kit box for skiers and snowboarders. The long slot holds the plexi scraper, two wells take wax pucks for warm and cold snow, and the big bay holds the brush and cork. The lid stops wax shavings getting everywhere, and WAX is engraved on top.

Customize this model

Size: 230 × 110 × 40 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 271 cm³
Est. weight (PLA): 336 g
Parts to print: 2
Category: Outdoor & adventure
Made by: Krypto
Built in: 24 steps

What’s in it

Rectangular, 230 × 110 × 40 mm, with 2.4 mm walls
2 dividers
Raised text: “WAX”
Lift-off lid (prints separately)

How to print it

The long slot takes a 150 mm plexi scraper.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 336 g of PLA printed solid (roughly $6.71 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the ski wax and scraper kit model?

The ski wax and scraper kit model measures 230 × 110 × 40 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. The long slot takes a 150 mm plexi scraper. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 336 g of PLA (271 cm³ printed solid), roughly $6.71 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More outdoor & adventure

Bow-drill palm block with ball-race socket

Cut friction at the top of a bow drill

Advanced

Keyhole pebble tarp tie-out

Add a tie-out point anywhere on a tarp

Simple (set)

Tick removal card

Remove ticks from people and pets

Simple

Bat roost box

Give bats a place to roost

Medium

Trekking pole tip cover

Cover a trekking pole tip

Simple (set)

Beachcomber sifting sorter

Sift sand from beach finds and sort them on the spot

Medium

Metal-detecting finds sorter

Sort detecting finds into keep, clean and trash in the field

Medium

Archery point and nock sorter

Sort arrow points, nocks and inserts by weight

Multi-part assembly

See all 43 in Outdoor & adventure

Make it fit your space

Change the size, walls, dividers, holes and labels of the ski wax and scraper kit model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model