Archery point and nock sorter — 3D-printable model preview

AR view

Outdoor & adventure Multi-part assembly

Archery point and nock sorter

Sort arrow points, nocks and inserts by weight

An archer's parts box for field points by grain weight, nocks, inserts and fletching tape: eight cells under a lift-off lid. ARCHERY is engraved on the lid so it can be found in a cluttered range bag.

Customize this model

Size: 160 × 110 × 30 mm
Shape: Rectangular
Walls: 2.4 mm
Volume: 190 cm³
Est. weight (PLA): 236 g
Parts to print: 2
Category: Outdoor & adventure
Made by: Krypto
Built in: 24 steps

What’s in it

Rectangular, 160 × 110 × 30 mm, with 2.4 mm walls
4 dividers in a grid layout
Engraved text: “ARCHERY”
Lift-off lid (prints separately)

How to print it

Write the grain weights on the lid label strip.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 236 g of PLA printed solid (roughly $4.71 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the archery point and nock sorter model?

The archery point and nock sorter model measures 160 × 110 × 30 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Write the grain weights on the lid label strip. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 236 g of PLA (190 cm³ printed solid), roughly $4.71 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More outdoor & adventure

Bow-drill palm block with ball-race socket

Cut friction at the top of a bow drill

Advanced

Keyhole pebble tarp tie-out

Add a tie-out point anywhere on a tarp

Simple (set)

Tick removal card

Remove ticks from people and pets

Simple

Bat roost box

Give bats a place to roost

Medium

Trekking pole tip cover

Cover a trekking pole tip

Simple (set)

Metal-detecting finds sorter

Sort detecting finds into keep, clean and trash in the field

Medium

Ski wax and scraper kit

Keep ski or snowboard wax, scraper and brush together

Multi-part assembly

Fishing float tube box

Carry long fishing floats without snapping their tips

Multi-part assembly

See all 43 in Outdoor & adventure

Make it fit your space

Change the size, walls, dividers, holes and labels of the archery point and nock sorter model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model