Pitch a tent on sand or snow
A wide blade peg that holds in loose sand and snow where thin pegs pull out: bury it at an angle with the guy line hooked over the head.
Print flat in PETG; print a set.
Filament: at most about 25.4 g of PLA printed solid (roughly $0.51 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The sand and snow tent peg model measures 28 × 219 × 8 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
Usually not. Print flat in PETG; print a set.
At most about 25.4 g of PLA (20.5 cm³ printed solid), roughly $0.51 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the sand and snow tent peg model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.