Keep paddling drips out of the boat
Slide one onto each side of a kayak paddle shaft so water running down the shaft drips off the ring instead of into your lap.
Print two in TPU or PETG.
Prints as shown on its floor, no supports.
Filament: at most about 14.0 g of PLA printed solid (roughly $0.28 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The kayak paddle drip rings model measures Ø 70 mm, 10 mm tall. You can change every size in the free SO3D.xyz generator before you download it.
No. Print two in TPU or PETG. Prints as shown on its floor, no supports.
At most about 14.0 g of PLA (11.3 cm³ printed solid), roughly $0.28 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the kayak paddle drip rings model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.