Ringpod

Keep a ring safe on a keyring while you work out

A screw-top capsule on your keyring that keeps your wedding ring safe at the gym, the pool or while kneading bread. The 30 mm pod has a loop on its side, the lid screws down tight and carries your initials, so the ring is never left on a sink edge again.

Customize this model

Size (Base A): Ø 30 mm, 14 mm tall
Shape: Round
Walls: 2.0 mm
Volume: 9.9 cm³
Est. weight (PLA): 12.3 g
Parts to print: 3
Category: Travel & everyday carry
Made by: Krypto
Built in: 23 steps

What’s in it

Round, Ø 30 mm, 14 mm tall, with 2.0 mm walls
1 hole in the floor
Engraved text: “J R”
Screw-on lid (prints separately)
One more base built on (Base B)
Base B: round, Ø 12 mm, 4 mm tall (beside)

How to print it

PETG body and lid; a felt disc stops rattling.

Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

Filament: at most about 12.3 g of PLA printed solid (roughly $0.25 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the ringpod model?

The ringpod model measures Ø 30 mm, 14 mm tall. That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG body and lid; a felt disc stops rattling. Prints as shown on its floor, no supports. The threaded lid and its neck piece print separately; adjust Fit in the Lid tab if it binds.

How much filament does it use?

At most about 12.3 g of PLA (9.9 cm³ printed solid), roughly $0.25 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

3 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.