Carousel Tag

Label luggage without showing your address

A luggage tag that hides your address. The name in relief on the sliding cover is all anyone at the carousel can see; lift the cover and your address card is inside. The strap tab on the side takes a leather loop or a cable tie.

Customize this model

Size (Base A): 92 × 58 × 8 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 44.2 cm³
Est. weight (PLA): 54.8 g
Parts to print: 2
Category: Travel & everyday carry
Made by: Krypto
Built in: 35 steps

What’s in it

Rectangular, 92 × 58 × 8 mm, with 2.0 mm walls
1 hole in the floor
Engraved and raised text: “MARGOT LEE”, “IF FOUND, LIFT ME”
Telescoping lid (prints separately)
One more base built on (Base B)
Base B: rectangular, 18 × 32 mm, 4 mm tall (beside)

How to print it

Bright PETG so the bag stands out on the belt.

Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

Filament: at most about 54.8 g of PLA printed solid (roughly $1.10 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the carousel Tag model?

The carousel Tag model measures 92 × 58 × 8 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Bright PETG so the bag stands out on the belt. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 54.8 g of PLA (44.2 cm³ printed solid), roughly $1.10 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.