Ring-loop carry-all stack with Greek key band — 3D-printable model preview

AR view

Desk organisation Medium

Ring-loop carry-all stack with Greek key band

Carry desk or craft supplies from room to room

Two square trays on one centre column with a ring loop to carry them by, and a Greek-key band round both. Move the day's desk bits or craft supplies from room to room in one go.

Customize this model

Size (Base A): 150 × 150 × 34 mm
Shape: Square
Walls: 2.0 mm
Volume: 244 cm³
Est. weight (PLA): 303 g
Parts to print: 1
Category: Desk organisation
Made by: Krypto
Built in: 17 steps

What’s in it

Square, 150 × 150 × 34 mm, with 2.0 mm walls
Single raised square foot
2 patterned wall panels (raised)
One more base built on (Base B)
Base B: square, 120 × 120 mm, 30 mm tall (stacked on a screw-in column)

How to print it

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 303 g of PLA printed solid (roughly $6.05 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the ring-loop carry-all stack with Greek key band model?

The ring-loop carry-all stack with Greek key band model measures 150 × 150 × 34 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 303 g of PLA (244 cm³ printed solid), roughly $6.05 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More desk organisation

Desk-back gap shelf

Stop things falling down behind the desk

Simple (set)

Desk mug lid with spoon slot

Keep a desk drink warm and covered

Simple

Rolled-drawing corner weights

Hold rolled drawings flat on the desk

Multi-part assembly

Desk-edge hook for bag or headset

Hang a bag or headset at a desk

Simple

Desk-edge cup holder

Keep drinks off a busy desk

Simple

Voronoi cutout pencil cup

Hold pens and pencils in a see-through cup

Medium

Fin-stand pen and tape shelf

Sort pens, tape and clips along the desk edge

Simple

Leaning stationery and card tray

Keep cards and stationery tilted toward you

Medium

See all 165 in Desk organisation

Make it fit your space

Change the size, walls, dividers, holes and labels of the ring-loop carry-all stack with Greek key band model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model