Sort pens, tape and clips along the desk edge
A long shelf with two dividers carried on a single wedge-shaped fin down the middle, so it sits steadily and leaves room underneath. Pens, tape and clips each get a bay.
Prints as shown on its floor, no supports.
Filament: at most about 233 g of PLA printed solid (roughly $4.67 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).
The fin-stand pen and tape shelf model measures 220 × 70 × 70 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports.
At most about 233 g of PLA (188 cm³ printed solid), roughly $4.67 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the fin-stand pen and tape shelf model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.