Pod of Five

Give five truffles in a pea pod box

A gift box for five chocolate truffles shaped like a pea pod. Five cells line up along the curved pod, one per truffle, and the snug lid closes it like a pod not yet split. Fill it with truffles, sugared almonds or macarons as a small present.

Customize this model

Size: 160 × 43 × 28 mm
Shape: Custom outline
Walls: 2.0 mm
Volume: 55.7 cm³
Est. weight (PLA): 69.1 g
Parts to print: 2
Category: Baking & sweets
Made by: Krypto
Built in: 19 steps

What’s in it

Custom outline, 160 × 43 × 28 mm, with 2.0 mm walls
Custom outline traced from a shape
4 dividers
Telescoping lid (prints separately)

How to print it

Food-safe PETG, or line with paper cases.

Prints as shown on its outline, no supports. The lid prints as a separate part, top down.

Filament: at most about 69.1 g of PLA printed solid (roughly $1.38 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the pod of Five model?

The pod of Five model measures 160 × 43 × 28 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Food-safe PETG, or line with paper cases. Prints as shown on its outline, no supports. The lid prints as a separate part, top down.

How much filament does it use?

At most about 69.1 g of PLA (55.7 cm³ printed solid), roughly $1.38 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.