Vow Arch

Crown a wedding cake with an arched name topper

A cake topper with an arched window. The names sit on a crossbar under a 136 mm half-disc with a rounded opening, like a doorway the couple step through, and two tapered picks push into the cake. Print it in gold or pearl for weddings, engagements and anniversaries.

Customize this model

Size: 136 × 129 × 8 mm
Shape: Custom outline
Walls: 3.0 mm
Volume: 18.3 cm³
Est. weight (PLA): 22.7 g
Parts to print: 1
Category: Baking & sweets
Made by: Krypto
Built in: 23 steps

What’s in it

Custom outline, 136 × 129 × 8 mm, with 3.0 mm walls
Custom outline traced from a shape
1 hole in the floor
Engraved text: “SAM & ALEX”, “12.06.2027”

How to print it

Print flat in silk gold PLA; picks are food-contact only at the tips.

Filament: at most about 22.7 g of PLA printed solid (roughly $0.45 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the vow Arch model?

The vow Arch model measures 136 × 129 × 8 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

Usually not. Print flat in silk gold PLA; picks are food-contact only at the tips.

How much filament does it use?

At most about 22.7 g of PLA (18.3 cm³ printed solid), roughly $0.45 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.