Paracord bracelet jig — 3D-printable model preview

AR view

Outdoor & adventure Advanced

Paracord bracelet jig

Tie paracord bracelets to an exact length

Push two pencils through the double plate: one at the fixed end, one at 6, 7 or 8 inches. Clip the buckle halves over them and the cord stays taut while you tie cobra knots, so every bracelet comes out the same length and tension.

Customize this model

Size (Base A): 240 × 40 × 30 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 47.7 cm³
Est. weight (PLA): 59.1 g
Parts to print: 1
Category: Outdoor & adventure
Made by: Krypto
Built in: 52 steps

What’s in it

Rectangular, 240 × 40 × 30 mm, with 3.0 mm walls
8 holes in the floor
Raised text: “6 IN”, “7”, “8”
One more base built on (Base B)
Base B: rectangular, 240 × 40 mm (stacked)

How to print it

Prints as shown on its floor, no supports. Stacked parts are fused into one print.

Filament: at most about 59.1 g of PLA printed solid (roughly $1.18 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the paracord bracelet jig model?

The paracord bracelet jig model measures 240 × 40 × 30 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Prints as shown on its floor, no supports. Stacked parts are fused into one print.

How much filament does it use?

At most about 59.1 g of PLA (47.7 cm³ printed solid), roughly $1.18 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More outdoor & adventure

Bow-drill palm block with ball-race socket

Cut friction at the top of a bow drill

Advanced

Keyhole pebble tarp tie-out

Add a tie-out point anywhere on a tarp

Simple (set)

Tick removal card

Remove ticks from people and pets

Simple

Bat roost box

Give bats a place to roost

Medium

Trekking pole tip cover

Cover a trekking pole tip

Simple (set)

Headtorch lantern shell

Turn a headtorch into a tent lantern

Medium

Avalanche slope clinometer card

Measure slope angle for avalanche safety

Simple

Map romer for grid references

Read map grid references precisely

Simple

See all 43 in Outdoor & adventure

Make it fit your space

Change the size, walls, dividers, holes and labels of the paracord bracelet jig model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model