Store a retainer or night guard
A kidney-shaped case that takes an upper or lower retainer or a night guard, with a telescoping lid and two air holes in the floor so it dries instead of sweating.
Prints as shown on its outline, no supports. The lid prints as a separate part, top down.
Filament: at most about 50.0 g of PLA printed solid (roughly $1.00 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The orthodontic retainer case model measures 92 × 59 × 34 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its outline, no supports. The lid prints as a separate part, top down.
At most about 50.0 g of PLA (40.3 cm³ printed solid), roughly $1.00 of filament at $20 per kg. Normal infill uses less.
2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the orthodontic retainer case model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.