Motorcycle side-stand puck — 3D-printable model preview

AR view

Car & bike Medium

Motorcycle side-stand puck

Stop a motorbike sinking on soft ground

Drop it under the side stand on grass, gravel or hot tarmac: the 110 x 80 mm footprint spreads the load so the bike does not sink and fall, the textured underside does not slide, and a cord through the edge hole lets you lift it back up from the saddle.

Customize this model

Size: 110 × 80 × 14 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 28.1 cm³
Est. weight (PLA): 34.8 g
Parts to print: 1
Category: Car & bike
Made by: Krypto
Built in: 18 steps

What’s in it

Rectangular, 110 × 80 × 14 mm, with 3.0 mm walls
1 hole in the floor
1 patterned wall panel (raised)

How to print it

PETG or ASA, 5 walls, 50 % infill.

Prints as shown on its floor, no supports.

Filament: at most about 34.8 g of PLA printed solid (roughly $0.70 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the motorcycle side-stand puck model?

The motorcycle side-stand puck model measures 110 × 80 × 14 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG or ASA, 5 walls, 50 % infill. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 34.8 g of PLA (28.1 cm³ printed solid), roughly $0.70 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More car & bike

EV charging plug wall holster

Keep an EV charging plug clean and off the floor

Simple

Car trim panel pry tool

Remove car trim panels without damage

Simple

Saddle height memory collar

Return a bike saddle to the same height

Simple

Ratchet strap winding key

Roll ratchet straps up neatly

Simple

Car visor glasses clip

Keep glasses handy in the car

Simple

Hydraulic disc brake pad spacer

Stop disc brake pads closing with the wheel out

Simple (set)

Tyre tread depth step gauge

Check tyre tread depth against the legal limit

Simple

Rear dropout chain keeper

Keep the chain tensioned with the rear wheel out

Advanced

See all 27 in Car & bike

Make it fit your space

Change the size, walls, dividers, holes and labels of the motorcycle side-stand puck model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model