Hold a mezuzah scroll on a doorpost
A slim, simple case for a mezuzah scroll up to 10 cm: roll the scroll into the case, close the telescoping lid and fix it to the doorpost through the two screw holes.
Prints as shown on its floor, no supports. The lid prints as a separate part, top down.
Filament: at most about 4.9 g of PLA printed solid (roughly $0.10 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The mezuzah case model measures 22 × 18 × 120 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints as shown on its floor, no supports. The lid prints as a separate part, top down.
At most about 4.9 g of PLA (3.9 cm³ printed solid), roughly $0.10 of filament at $20 per kg. Normal infill uses less.
2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF puts them all on one plate.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the mezuzah case model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.