Layer Lift

Move whole cake layers without breaking them

A 200 mm flat lifter for moving whole sponge layers, cheesecakes and tart bases: slide it under the cake from the side, carry it on the broad blade and slide it off onto the stand or the next layer without cracking it. It doubles as a lid when you chill a layer.

Customize this model

Size: 200 × 289 × 8 mm
Shape: Custom outline
Walls: 3.0 mm
Volume: 126 cm³
Est. weight (PLA): 156 g
Parts to print: 1
Category: Baking & sweets
Made by: Krypto
Built in: 11 steps

What’s in it

Custom outline, 200 × 289 × 8 mm, with 3.0 mm walls
Custom outline traced from a shape
Engraved text: “LAYER LIFT”

How to print it

Food-safe PETG, printed flat; hand wash.

Prints flat as a plate, no supports.

Filament: at most about 156 g of PLA printed solid (roughly $3.12 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the layer Lift model?

The layer Lift model measures 200 × 289 × 8 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Food-safe PETG, printed flat; hand wash. Prints flat as a plate, no supports.

How much filament does it use?

At most about 156 g of PLA (126 cm³ printed solid), roughly $3.12 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.