Wind and fly kite line
An H-shaped winder for kite line: wind the line round the waist in a figure of eight, hold both grips to let the kite out smoothly, and hook the end into the notch when you pack up.
Prints flat as a plate, no supports.
Filament: at most about 52.8 g of PLA printed solid (roughly $1.06 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The kite line winder model measures 160 × 90 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints flat as a plate, no supports.
At most about 52.8 g of PLA (42.6 cm³ printed solid), roughly $1.06 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the kite line winder model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.