Adjust tent and tarp guy lines
Thread a tent or tarp guy line through the three holes and it holds tension by friction; slide the tensioner along the line to tighten or loosen it without retying any knots.
Prints flat as a plate, no supports.
Filament: at most about 7.8 g of PLA printed solid (roughly $0.16 at $20 per kg); normal infill uses less.
To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).
The guy line tensioner model measures 60 × 22 × 10 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.
No. Prints flat as a plate, no supports.
At most about 7.8 g of PLA (6.3 cm³ printed solid), roughly $0.16 of filament at $20 per kg. Normal infill uses less.
Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.
Change the size, walls, dividers, holes and labels of the guy line tensioner model in your browser, then download it for your printer. Free, no CAD needed.
SO3D.xyz is free and built by one maker. Help keep it running.
Be one of the first supporters this month.