Honing guide projection jig — 3D-printable model preview

AR view

Woodworking Advanced

Honing guide projection jig

Set honing guide projection repeatably

Hook a side-clamp honing guide over the low front wall and slide the blade forward until it touches a stop block: the four stepped blocks set 32, 38, 42 and 50 mm of projection, the settings for 25 and 30 degree bevels on plane irons and chisels in an Eclipse-pattern guide. Every resharpening lands on the same angle.

Customize this model

Size (Base A): 150 × 70 × 14 mm
Shape: Rectangular
Walls: 3.0 mm
Volume: 47.1 cm³
Est. weight (PLA): 58.4 g
Parts to print: 1
Category: Woodworking
Made by: Krypto
Built in: 34 steps

What’s in it

Rectangular, 150 × 70 × 14 mm, with 3.0 mm walls
Raised grip base
Engraved text: “32”, “38”, “42”, “50”
4 more bases built on (Bases B–E)
Base B: rectangular, 14 × 38 mm, 10 mm tall (beside)
Base C: rectangular, 14 × 32 mm, 10 mm tall (beside)
Base D: rectangular, 14 × 28 mm, 10 mm tall (beside)
Base E: rectangular, 14 × 20 mm, 10 mm tall (beside)

How to print it

Prints as shown on its floor, no supports.

Filament: at most about 58.4 g of PLA printed solid (roughly $1.17 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the honing guide projection jig model?

The honing guide projection jig model measures 150 × 70 × 14 mm (width × depth × height). That is Base A; 4 more bases are built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Prints as shown on its floor, no supports.

How much filament does it use?

At most about 58.4 g of PLA (47.1 cm³ printed solid), roughly $1.17 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More woodworking

Router table featherboard

Keep wood pressed against a fence

Medium

Wooden dovetail marker

Mark dovetail joints

Simple

Board centre finder

Mark the centre line of a board edge

Advanced

Jointer and router push block

Feed boards safely past a cutter

Advanced

Offset pencil marking gauge

Draw lines parallel to a board edge

Medium

V centre finder for turning blanks

Find the centre of round stock

Simple

Cambered glue-up cauls

Clamp panel glue-ups evenly across their width

Simple (set)

Kerf-keeper wedge

Stop a saw kerf closing on the blade

Simple (set)

See all 31 in Woodworking

Make it fit your space

Change the size, walls, dividers, holes and labels of the honing guide projection jig model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model