Gas canister stabiliser tripod — 3D-printable model preview

AR view

Outdoor & adventure Simple

Gas canister stabiliser tripod

Stop a canister stove tipping over

Stand a 230 g screw-thread gas canister in the ring and the three arms spread its footprint to 216 mm, so a top-mounted stove with a full pan no longer topples on uneven ground. Weighs a few grams and nests round the canister in the pot.

Customize this model

Size: 216 × 190 × 14 mm
Shape: Custom outline
Walls: 2.4 mm
Volume: 56.5 cm³
Est. weight (PLA): 70.1 g
Parts to print: 1
Category: Outdoor & adventure
Made by: Krypto
Built in: 4 steps

What’s in it

Custom outline, 216 × 190 × 14 mm, with 2.4 mm walls
Custom outline traced from a shape

How to print it

PETG or ASA; keep it away from the flame.

Prints as shown on its outline, no supports.

Filament: at most about 70.1 g of PLA printed solid (roughly $1.40 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (every part on one plate).

Questions

What size is the gas canister stabiliser tripod model?

The gas canister stabiliser tripod model measures 216 × 190 × 14 mm (width × depth × height). You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. PETG or ASA; keep it away from the flame. Prints as shown on its outline, no supports.

How much filament does it use?

At most about 70.1 g of PLA (56.5 cm³ printed solid), roughly $1.40 of filament at $20 per kg. Normal infill uses less.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More outdoor & adventure

Bow-drill palm block with ball-race socket

Cut friction at the top of a bow drill

Advanced

Keyhole pebble tarp tie-out

Add a tie-out point anywhere on a tarp

Simple (set)

Tick removal card

Remove ticks from people and pets

Simple

Bat roost box

Give bats a place to roost

Medium

Trekking pole tip cover

Cover a trekking pole tip

Simple (set)

Crab and lobster size gauge

Check crabs and lobsters against minimum size

Simple

Cathole trowel with depth notches

Dig a cathole to the correct depth

Simple

Avalanche slope clinometer card

Measure slope angle for avalanche safety

Simple

See all 43 in Outdoor & adventure

Make it fit your space

Change the size, walls, dividers, holes and labels of the gas canister stabiliser tripod model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model