Drawer corner carousel — 3D-printable model preview

AR view

Kitchen organisers Multi-part assembly

Drawer corner carousel

Bring things from the back of a drawer to the front with one turn

A turntable that sits in the back corner of a drawer, where things are normally lost. Six wedges and a centre well hold small jars, tea tins, sauces or cake decorations; give it a turn and whatever was at the back comes round to the front, without lifting anything out.

Customize this model

Size: Ø 220 mm, 55 mm tall
Shape: Round
Walls: 2.0 mm
Volume: 473 cm³
Est. weight (PLA): 586 g
Parts to print: 2
Category: Kitchen organisers
Made by: Krypto
Built in: 10 steps

What’s in it

Round, Ø 220 mm, 55 mm tall, with 2.0 mm walls
Lazy Susan turntable base (spins on 6 mm BBs)
Radial dividers making 6 wedge-shaped sections
1 patterned wall panel (raised)

How to print it

The base ring prints separately. Needs 55 mm of drawer depth.

Prints as shown on its floor, no supports. The turntable ring prints separately and runs on 6 mm BBs.

Filament: at most about 586 g of PLA printed solid (roughly $11.72 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the drawer corner carousel model?

The drawer corner carousel model measures Ø 220 mm, 55 mm tall. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. The base ring prints separately. Needs 55 mm of drawer depth. Prints as shown on its floor, no supports. The turntable ring prints separately and runs on 6 mm BBs.

How much filament does it use?

At most about 586 g of PLA (473 cm³ printed solid), roughly $11.72 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF gives a 3MF per part plus a Bambu Studio / Orca Slicer project with each part on its own plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More kitchen organisers

Shukhov Base

Build a hyperboloid crock from straight skewers

Simple

Shukhov Collar

Twist straight skewers into a hyperboloid waist

Simple

Drawer-front peelings bag hook

Hang a scraps bag under the chopping board

Simple (set)

Mixing bowl tilt ring

Hold a mixing bowl steady at an angle

Simple

Flour canister levelling bar

Level measuring scoops over the canister

Simple

Tilted spice drawer with label-up rows

Read every spice label at a glance in a shallow drawer

Simple

Variable-slot bakeware and lid file

Stand bakeware and lids on edge so you can lift out just one

Advanced

Cutlery tray with a secret drawer underneath

Use the wasted space under a cutlery tray as a hidden drawer

Multi-part assembly

See all 94 in Kitchen organisers

Make it fit your space

Change the size, walls, dividers, holes and labels of the drawer corner carousel model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model