Cutlery tray with a secret drawer underneath — 3D-printable model preview

AR view

Kitchen organisers Multi-part assembly

Cutlery tray with a secret drawer underneath

Use the wasted space under a cutlery tray as a hidden drawer

A six-bay cutlery tray that sits on a slim drawer of its own. In a deep drawer the space under a cutlery tray is usually wasted; here it becomes a hidden flat drawer for receipts, warranty cards, spare batteries or birthday candles that nobody knows is there.

Customize this model

Size (Base A): 240 × 200 × 30 mm
Shape: Rectangular
Walls: 2.0 mm
Volume: 655 cm³
Est. weight (PLA): 812 g
Parts to print: 2
Category: Kitchen organisers
Made by: Krypto
Built in: 13 steps

What’s in it

Rectangular, 240 × 200 × 30 mm, with 2.0 mm walls
3 dividers
A pull-out drawer in a sleeve
One more base built on (Base B)
Base B: rectangular, 240 × 200 mm, 50 mm tall (stacked)

How to print it

Print the tray, the drawer and its case separately.

Prints as shown on its floor, no supports. The drawer prints separately from the case. Stacked parts are fused into one print.

Filament: at most about 812 g of PLA printed solid (roughly $16.24 at $20 per kg); normal infill uses less.

To get the files, open it in the generator and choose File › Download STL (one file per part) or Download 3MF (a 3MF per part, plus a Bambu Studio / Orca Slicer project with every part on its own plate).

Questions

What size is the cutlery tray with a secret drawer underneath model?

The cutlery tray with a secret drawer underneath model measures 240 × 200 × 30 mm (width × depth × height). That is Base A; one more base is built on. You can change every size in the free SO3D.xyz generator before you download it.

Does it need supports?

No. Print the tray, the drawer and its case separately. Prints as shown on its floor, no supports. The drawer prints separately from the case. Stacked parts are fused into one print.

How much filament does it use?

At most about 812 g of PLA (655 cm³ printed solid), roughly $16.24 of filament at $20 per kg. Normal infill uses less.

How many parts does it print as?

2 parts. The download lays each part flat in its best print position: Download STL gives one file per part, Download 3MF gives a 3MF per part plus a Bambu Studio / Orca Slicer project with each part on its own plate.

Can I change it?

Yes. Open it in the SO3D.xyz generator (free, in your browser), change the size, walls, dividers, holes, text or anything else, then download it as STL or 3MF for your slicer.

More kitchen organisers

Shukhov Base

Build a hyperboloid crock from straight skewers

Simple

Shukhov Collar

Twist straight skewers into a hyperboloid waist

Simple

Drawer-front peelings bag hook

Hang a scraps bag under the chopping board

Simple (set)

Mixing bowl tilt ring

Hold a mixing bowl steady at an angle

Simple

Flour canister levelling bar

Level measuring scoops over the canister

Simple

Wet-and-dry sink drawer caddy

Stop wet sponges soaking the drawer and everything in it

Advanced

Drawer corner carousel

Bring things from the back of a drawer to the front with one turn

Multi-part assembly

Measuring station with conversion-chart floor

Keep measuring tools and kitchen conversions together

Medium

See all 94 in Kitchen organisers

Make it fit your space

Change the size, walls, dividers, holes and labels of the cutlery tray with a secret drawer underneath model in your browser, then download it for your printer. Free, no CAD needed.

Customize this model